All data is for information only------(<---links)
	PRODUCT DATA of AISI 434

Material	AISI 434
General Information	Ferritic stainless steel
Chemical Composition	16-18Cr, 0.75-1.25Mo, rem Fe

	PHYSICAL PROPERTIES

Crystal Structure	Face centered cubic (fcc)
Specific Gravity	7.8
Magnetic Properties	Ferromagnetic

	ELECTRICAL PROPERTIES

Electrical Volume Resistivity

6e-7 ohm.m

	THERMAL PROPERTIES

Thermal Conductivity	26.3 W/m.K
Thermal Expansion Coefficient	10.4 μstrain/°C
Specific Heat	0.46 J/g.K

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

General Corrosion Status	No specific corrosion protection required
Stress Corrosion Status	High Resistance to SCC: Table 1 Remark: Tempering between 371C and 593C shall be avoided because corrosion and stress corrosion cracking resistance is lowered. Data Quality: Design Data
Bimetallic Corrosion	Can be connected without any restriction to: Cr, Au, Ag, Gun-metal, P-bronzes, Sn-bronzes, Ti+alloys, Ni, Monel, Inconel, Ni/Mo alloys Can be connected in a non-controlled environment to the above and Cd, austenitic cast iron, Cu, Brasses, Al-bronzes, Si-bronzes, Au, Pt, C, Rh, Sn-Pb alloys, Sn, Pb, 300 series stainless steels Can be connected in a clean room environment to above and Al-Cu alloys Needs specific measures: All others Test:ECSS-Q-ST-70C Rev.1 Table 5.1 Data Quality: Design Data